Scanning To Ftp Servers - Muratec MFX-3510 User Manual

Scanning to FTP servers

You can save a scanned document to a specific folder on an FTP (File Transfer Protocol)
server.
LAN
NOTE
• To scan to FTP server, you should connect the machine to a network and setup the
"TCP/IP Settings" in advance.
See chapter 2, "TCP/IP settings" in "Specifying the network settings" in the
Administrator's Guide.
• To scan to FTP server, the destinations should be registered to your machine in
advance. For details on registering the FTP shortcuts, see chapter 2 "Registering
shortcuts" in the OfficeBridge Guide.
1
Load the document.
2
Press the mode change key to change to scan mode.
3
Set the resolution and document type, as necessary.
For details, see
4
Press [Select Address].
Scan
FTP Server
"Resolution" (page 1-12) and
PDF, JPEG TIFF, PDF
"Color" (page 1-12).
Basic scanning 1-7
1