Muratec MFX-3510 User Manual page 21

5
Select the setting.
Item
Resolution
Pixel type
Document type
Contrast
Document size
Size
Fixed image size This setting may be required, depending on the application software.
[Default]
[Scan]
[Select MFP]
[Save]
[Exit]
[Extended
Functions] tab
[Information] tab
1-14 Scanning with a TWAIN driver
This setting may be required, depending on the application software.
Set it as required.
(Normally it is not necessary to change this setting from its default
value.)
Select to scan in color, B/W (black and white) or grayscale.
Select the document type.
Select the contrast.
The default scan size of the machine is displayed.
Select the document size.
Set it as required.
(Normally it is not necessary to change this setting from its default
value.)
Click to return the settings to the factory defaults.
Click to start scanning.
Click to change the scanner or when the IP address of the machine
has changed, etc.
This is for network scanning only.
Click to save the current settings.
This cannot be clicked unless the settings have been changed.
Click to close the screen.
See the next step.
Displays the version information for the scanner driver.
Description