Muratec MFX-3510 User Manual page 155

„ Scan to folder communication errors
Error code
9999
1001, 1003,
1007, 1008,
1009, 1010,
1011, 1013,
1015, 1016,
1017, 1032,
1033, 1066,
1080, 1087,
1122, 1123,
1183, 1230,
1231, 1232,
1233, 1234,
2001
1002, 1004,
1006, 2999,
3019, 3020,
3021, 3022,
3023, 3024,
3025, 3026,
3027, 3028,
3029, 3030,
3031, 3034,
3035, 3036,
3039
1005, 1012,
2002, 2004,
2006, 2007,
2049, 2050,
2051, 2052,
2065, 2067,
2069, 2071,
2081, 2082,
2083, 2087,
2088, 2089,
2090
1018
1067
8-6 Error messages
Error message
System error occurred.
Cannot connect.
Cannot read or write to the file.
Not able to log in.
Not a shared folder.
Not a shared folder.
Countermeasure
An error occurred because the system
memory was temporarily insufficient. Wait a
while, and perform the operation again.
Check whether there is a computer with the
same name as the host name of the machine
on the network.
In the TCP/IP settings, check whether the
DNS server address, DNS suffix, and WINS
server address are set correctly.
Check whether the destination computer
name is registered in the DNS server.
Check whether WINS is set correctly in the
destination computer.
Check whether the shared folder on the
destination computer has writing prohibited.
Check whether the user name and password
for logging in to the shared folder specified as
the destination are entered correctly.
If you are using Windows 2003, enter the
name and password of a user with write
privileges for logging in.
Check whether the file specified as the file to
attach exists.
Check whether the folder specified as the
destination to save the file is set as a shared
folder.