Description
Parameters
Restrictions
Example usage:
To delete a protocol group 1:
DGS-1210-28P/ME:5# delete dot1v_protocol_group all
Command: delete dot1v_protocol_group all
Success.
DGS-1210-28P/ME:5#
show dot1v_protocol_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the protocol group ID 1:
DGS-1210-28P/ME:5# show dot1v_protocol_group
Command: show dot1v_protocol_group
Group ID Protocol Group Name
------------- --------------------------------
Total Entries: 0
DGS-1210-28P/ME:5#
config port dot1v ports all
Purpose
Syntax
Description
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
The delete dot1v_protocol_group command deletes a protocol
group.
group_id <id 1-16> − Specifies the group ID to be deleted.
group_name <name 32> − The name of the protocol group. The
maximum length is 32 characters.
Only Administrator and Operator and Power-User-level users can
issue this command.
To display the protocols defined in a protocol group.
show dot1v_protocol_group {group_id <id 1-16> | group_name
<name 32>}
The show dot1v_protocol_group command displays the protocols
defined in protocol groups.
group_id <id 1-16> − Specifies the group ID to be displayed.
group_name <name 32> − The name of the protocol group. The
maximum length is 32 characters.
None.
To assign the VLAN for untagged packets ingress from the portlist
based on the protocol group configured.
config port dot1v ports all [add | delete] protocol_group
[group_name <name 32> | group_id <id 1-16>] [vlan
<vlan_name 32> | vlanid <id 1-4094>]
The config port dot1v ports all command assign the VLAN for
untagged packets ingress from the portlist based on the protocol
Frame Type
------------------- ----------------------
228
Protocol Value