The following example turns off the Annex I feature for port 5.
Figure 210 Annex I Disable Command Example
ras> adsl annexi disable 5
49.2 Statistics ADSL Commands
Use these commands to display ADSL port statistics.
49.2.1 ADSL Show Command
Syntax:
ras> statistics adsl show [portlist]
where
[portlist]
This command displays ADSL port connection statistics including the status (V for enabled, -
for disabled), ADSL operational mode, upstream and downstream maximum rates, up time
and the number of errored seconds.
The following example displays connection statistics for ADSL port 1.
Figure 211 ADSL Show Command Example
ras> statistics adsl show 1
port status mode
---- ------ -------- ------------- -------------- ---------------------
1
V
49.2.2 Linedata Command
Syntax:
ras> statistics adsl linedata <portlist>
Chapter 49 ADSL Commands
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
up/downstream
adsl2
512/
9089 00000:00:04:59
IES-1248-51 User's Guide
up time error second(15M/24H)
15/15
319