This chapter gives some examples of commands.
39.1 Command Examples Overview
These are commands that you may use frequently in configuring and maintaining your IES-
1248-51. See
VLAN.
39.2 Sys Commands
These are the commonly used commands that belong to the sys (system) group of commands.
39.2.1 Log Show Command
Syntax:
ras> sys log show
This command displays the system error log. An example is shown next.
Figure 119 Log Show Command Example
ras> sys log show
1 Wed Aug 11 20:37:11 2004 telnetd
2 Wed Aug 11 20:37:05 2004 telnetd
3 Wed Aug 11 20:36:56 2004 telnetd
39.3 Log Format
The common format of the system logs is:
<log message>
Table 71 Log Format
LABEL
<item no>
<time>
Chapter 39 Command Examples
Command Examples
Chapter 42 on page 263
.
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
C
H A P T E R
for commands that deal with the IEEE 802.1Q Tagged
INFO
Session Begin!
INFO
Session Begin!
INFO
Session Begin!
<item no> <time> <process> <type>
IES-1248-51 User's Guide
3 9
241