IES-1248-51 User's Guide
Figure 207 Annex M Enable Command Example
ras> adsl annexm enable 5
49.1.21 Annex M Disable Command
Syntax:
ras> adsl annexm disable <portlist>
This command turns off the Annex M double upstream feature on the specified ADSL2/2+
port(s).
The following example turns off the Annex M feature for port 5.
Figure 208 Annex M Disable Command Example
ras> adsl annexm disable 5
49.1.22 Annex I Enable Command
Syntax:
ras> adsl annexi enable <portlist>
This command turns on the Annex I all digital mode feature on the specified ADSL2/2+
port(s). With Annex I, the ADSL connection uses the full spectrum of the physical line and the
user can not use POTS or ISDN service.
The following example turns on the Annex I feature for port 5.
Figure 209 Annex I Enable Command Example
ras> adsl annexi enable 5
49.1.23 Annex I Disable Command
Syntax:
ras> adsl annexi disable <portlist>
This command turns off the Annex I all digital mode feature on the specified ADSL2/2+
port(s).
318
Chapter 49 ADSL Commands