ZyXEL Communications IES-1248-51 User Manual page 84

IES-1248-51 User's Guide
Table 6 Port Statistics (Ethernet) (continued)
LABEL
Rx mac pause
Rx fragments
Rx error overrun
Rx error mru
Rx dropped
Rx jabber
Rx error alignment
Rx oversize
Rx undersize
Tx bytes
Tx packets
Tx multicast
Tx broadcast
Tx mac_pause
Tx fragments
Tx frames
Tx error underrun
Tx undersize
Tx jabber
Tx oversize
packet(<=64)
packet(65-127)
84
DESCRIPTION
This field shows the number of valid IEEE 802.3x Pause frames received on this
port.
This field shows the number of frames received that were less than 64 octets
long, and contained an invalid FCS, including non-integral and integral lengths.
This field shows how many times an Ethernet transmitter overrun occurred.
This field shows the number of received frames that were dropped due to
exceeding the Maximum Receive Unit frame size.
This field shows the number of received frames that were received into the IES-
1248-51, but later dropped because of a lack of system resources.
This field shows the number of frames received that were longer than 1518
octets (non VLAN) or 1522 octets (VLAN) and contained an invalid FCS,
including alignment errors.
This field shows the number of frames received that were 64 to 1518 (non
VLAN) or 1522 (VLAN) octets long but contained an invalid FCS and a non-
integral number of octets.
This field shows the number of frames received that were bigger than 1518 (non
VLAN) or 1522 (VLAN) octets and contained a valid FCS.
This field shows the number of frames received that were less than 64 octets
long and contained a valid FCS.
This field shows the number of bytes that have been transmitted on this port.
This includes collisions but not jam signal or preamble/SFD (Start of Frame
Delimiter) bytes.
This field shows the number of packets transmitted on this port.
This field shows the number of good multicast frames transmitted on this port
(not including broadcast frames).
This field shows the number of broadcast frames transmitted on this port (not
including multicast frames).
This field shows the number of valid IEEE 802.3x Pause frames transmitted on
this port.
This field shows the number of transmitted frames that were less than 64 octets
long, and with an incorrect FCS value.
This field shows the number of complete good frames transmitted on this port.
This field shows the number of outgoing frames that were less than 64 octets
long.
This field shows the number of frames transmitted that were less than 64 octets
long and contained a valid FCS.
This field shows the number of frames transmitted that were longer than 1518
octets (non VLAN) or 1522 octets (VLAN) and contained an incorrect FCS value.
This field shows the number of frames transmitted that were bigger than 1518
octets (non VLAN) or 1522 (VLAN) and contained a valid FCS.
This field shows the number of frames received and transmitted (including bad
frames) that were 64 octets or less in length (this includes FCS octets but
excludes framing bits).
This field shows the number of frames received and transmitted (including bad
frames) that were 65 to 127 octets in length (this includes FCS octets but
excludes framing bits).
Chapter 9 Home and Port Statistics Screens