Adsl Profile Delete Command; Figure 186 Adsl Profile Set Command Example 1; Figure 187 Adsl Profile Set Command Example 2; Figure 188 Adsl Profile Delete Command Example - ZyXEL Communications IES-1248-51 User Manual

transmission rate to 128 Kbps, the downstream target signal/noise margin to 5 db, the
downstream minimum acceptable signal/noise margin to 0 db, the downstream maximum
acceptable signal/noise margin to 30 db and the downstream minimum ADSL transmission
rate to 256Kbps.
The upstream down shift noise margin is 0 dB. The upstream up shift noise margin is 6 dB.
The downstream down shift noise margin is 0 dB. The downstream up shift noise margin is 6
dB.

Figure 186 ADSL Profile Set Command Example 1

ras> adsl profile set gold fast 1200 24000 5 0 30 128 5 0 30 256 0 6 0 6
This next example creates a similar premium profile (named
interleave delay of 16 ms for both upstream and downstream traffic.

Figure 187 ADSL Profile Set Command Example 2

ras> adsl profile set goldi interleave=16,16 1200 24000 5 0 30 128 5 0 30 256
0 6 0 6
After you create an ADSL profile, you can assign it to any of the ADSL ports on any of the
ADSL IES-1248-51 in the IES-1248-51.

49.1.6 ADSL Profile Delete Command

Syntax:
ras> adsl profile delete <profile>
where
<profile>
This command allows you to delete an individual ADSL profile by its name. You cannot
delete a profile that is assigned to any of the DSL ports in the IES-1248-51. Assign a different
profile to any DSL ports that are using the profile that you want to delete, and then you can
delete the profile.
The following example deletes the gold ADSL profile.

Figure 188 ADSL Profile Delete Command Example

ras> adsl profile delete gold
Chapter 49 ADSL Commands
A profile name.
=
IES-1248-51 User's Guide
), except it sets an
goldi
307