2684 Routed Mode Commands; Figure 238 Ppvc Delete Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide
where
<portlist>
<vpi>
<vci>
This command removes a PPVC. Removing a PPVC also deletes all of the member PVCs.
The following example removes a PPVC with VPI 8 and VCI 35 for port 5.

Figure 238 PPVC Delete Command Example

ras> adsl ppvc delete 5 8 35

50.7 2684 Routed Mode Commands

Use the 2684 routed mode to have the IES-1248-51 add MAC address headers to 2684 routed
mode traffic from a PVC that connects to a subscriber device that uses 2684 routed mode. You
can also specify the gateway to which the IES-1248-51 sends the traffic and the VLAN ID tag
to add. See RFC-2684 for details on routed mode traffic carried over AAL type 5 over ATM.
Use the commands in the following order to set up a 2684 routed mode PVC.
1 Use the
2 Use the
2684 routed mode traffic.
3 Use the
traffic. The domain is the range of IP addresses behind the subscriber's device (the CPE
or Customer Premises Equipment). This includes the CPE device's LAN IP addresses
and the IP addresses of the LAN computers.
4 Use the
addresses of CPE devices using 2684 routed mode and configure how long the device is
to store them.
5 For upstream traffic: Since the subscriber's device will not send out a MAC address, after
the IES-1248-51 reassembles the Ethernet packets from the AAL5 ATM cells, the IES-
1248-51 will append the routed mode gateway's MAC address and the IES-1248-51's
MAC address as the destination/source MAC address.
6 For downstream traffic: When the IES-1248-51 sees the destination IP address is
specified in the RPVC (or RPVC domain), the IES-1248-51 will strip out the MAC
header and send them to the corresponding RPVC.
348
The port(s) of the PPVC.
=
You can specify a single ADSL port <1>, all ADSL ports <*>
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
The VPI of the PPVC.
=
The VCI of the PPVC.
=
adsl rpvc gateway
command to configure RPVCs (2684 routed mode PVCs) for
adsl rpvc set
adsl rpvc route set
commands to view the Address Resolution Protocol table of IP
adsl rpvc arp
commands to configure gateway settings.
command to configure domains for 2684 routed mode
Chapter 50 Virtual Channel Management