IES-1248-51 User's Guide
41.2.1 Option 82 Sub-option 1 Enable Command
Syntax:
ras> switch dhcprelay option82 enable
This command turns on the DHCP relay agent information (Option 82) feature.
41.2.2 Option 82 Sub-option 1 Disable Command
Syntax:
ras> switch dhcprelay option82 disable
This command turns off the DHCP relay agent information (Option 82) feature.
41.2.3 Option 82 Sub-option 1 Set Command
Syntax:
ras> switch dhcprelay option82 set [<relay info>]
where
[<relay info>]
This command adds the specified information for the relay agent.
41.3 DHCP Relay Option 82 (Agent Information) Sub-option 2
(Remote ID)
Use the following commands to configure the DHCP relay Option 82 (agent information)
feature, sub-option 2.
41.3.1 Option 82 Sub-option 2 Enable Command
Syntax:
ras> switch dhcprelay opt82sub2 enable
260
Up to 23 ASCII characters of additional information for the
=
IES-1248-51 to add to the DHCP requests that it relays to a
DHCP server.
Examples of information you could add would be the name of
the IES-1248-51 or the ISP.
Chapter 41 DHCP Relay Commands