Log Format; Alarm History Show Command; Table 74 Log Format - ZyXEL Communications IES-1248-51 User Manual

40.7 Log Format

The following table describes the columns in the list.

Table 74 Log Format

LABEL
no
alarm
condition
facility
snmp
syslog
severity
clearable

40.8 Alarm History Show Command

Syntax:
ras> alarm history show [<severity>|all] [<alarm>|all] [<condition>|all]
[<sdate>|all] [<edate>|all] [for|rev] [detail]]
where
<sdate>
<edate>
[for|rev]
[detail]
This command displays historic alarms by severity, alarm category, alarm condition and/or
dates.
Chapter 40 Alarm Commands
DESCRIPTION
This is the index number of the alarm entry in this list display.
This is the category of alarms. eqpt represents equipment alarms. dsl represents
Digital Subscriber Line (DSL) alarms. enet represents Ethernet alarms. sys
represents system alarms.
There is a condition code number for the specific alarm message and a text
description for the condition under which the alarm applies.
This is the log facility (local1~local7) on the syslog server where the system is to
log this alarm. This is for alarms that send alarms to a syslog server.
This displays "V" if the system is to send this alarm to an SNMP server. It
displays "-" if the system does not send this alarm to an SNMP server.
This displays "V" if the system is to send this alarm to a syslog server. It displays
"-" if the system does not send this alarm to a syslog server.
This is the alarm severity level (critical, major, minor or info).
This displays "V" if the alarm clear command removes the alarm from the
system. It displays "-"if the alarm clear command does not remove the alarm
from the system.
The start date, in
=
The end date, in
=
The displaying order. Use
=
starting from the oldest alarm. Use
chronological order starting from the most recent alarm.
Display in-depth alarm information.
=
IES-1248-51 User's Guide
format.
yyyy/mm/dd
format.
yyyy/mm/dd
to display in chronological order
for
to display in reverse
rev
253