ZyXEL Communications IES-1248-51 User Manual page 236

IES-1248-51 User's Guide
Table 70 Commands (continued)
CLASS COMMAND
dhcprelay opt82sub2
disable
dhcprelay opt82sub2
set
vlan show
vlan port show
vlan set
vlan enable
vlan disable
vlan delete
vlan pvid
vlan priority
vlan gvrp
vlan frametype
vlan cpu show
vlan cpu set
mac flush
mac agingtime show
mac agingtime set
mac count show
mac count enable
mac count disable
mac count set
236
PARAMETERS
<relay info>
<vlanlist>
[portlist]
<vid><portlist>:<F
<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N> ...]
[name]
<vid>
<vid>
<vlanlist>
<portlist> <pvid>
<portlist>
<priority>
<portlist>
<enable|disable>
<portlist>
<all|tag>
<vid>
<sec,
10..10000|0:disabl
ed>
[portlist]
<portlist>
<portlist>
<portlist> <count>
DESCRIPTION
Turns off option 82 sub-option 2
Adds the specified information for
sub-option 2
Displays VLAN settings.
Displays the port(s) VLAN
settings.
Configures a VLAN entry.
Turns on a VLAN entry.
Turns off a VLAN entry.
Removes a VLAN entry.
Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
Sets a port's default IEEE 802.1p
priority.
Set the port(s) to enable or disable
gvrp.
Sets the specified DSL port to
accept tagged, untagged or
Ethernet frames (or both).
Note: enet1, enet2 are fixed at 'all'.
Displays the VLAN ID of the
management VLAN.
Sets the VLAN ID of the
management VLAN.
Clears learned MAC addresses
from the forwarding table.
Displays the MAC aging out time
period.
Sets the MAC aging out time
period.
Displays the system's current
MAC address count settings.
Turns on the MAC address count
filter for an ADSL port(s).
Turns off the MAC address count
filter for an ADSL port(s).
Sets the MAC address count filter
for an ADSL port(s).
Chapter 38 Commands
P
M/H
M/H
M/L
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
M/~
H/~
H/H
M/L
H/H
M/L
H/H
H/H
H/H