IES-1248-51 User's Guide
The following example displays the historic critical level alarms for all alarm categories, and
all conditions.
Figure 128 Alarm History Show Command Example
ras> alarm history show critical all all all all rev detail
no alarm
------ ------
1 eqpt
2 eqpt
3 eqpt
40.9 Alarm History Clear Command
Syntax:
ras> alarm history clear [<alarm>|all <condition>|all] <severity>
This command removes historic alarm entries by alarm category, alarm condition or severity.
The following example removes the historic minor level alarms for all alarm categories, and
all conditions.
Figure 129 Alarm History Clear Command Example
ras> alarm history clear minor
40.10 Alarm XEdit Command
Syntax:
ras> alarm xedit edit <alarm>|all <cond>|<condcode> <severity> <fac>
<target>[,<target>] [clearable]
where
<cond>
<condcode >
254
condition
------------------------ -------- -------------- -------
+fan_err
* IES-1248-51:Fan 2 speed 0, low 2000, high 8000
+fan_err
* IES-1248-51:Fan 3 speed 0, low 2000, high 8000
+fan_err
* IES-1248-51:Fan 1 speed 0, low 2000, high 8000
=
all|condition
under which the alarm applies. Use the
find alarm conditions.
The condition code is the number of a specific alarm message.
=
Use the
alarm tablelist
severity timestamp
critical 07/28 15:23:35 eqpt
critical 07/28 15:23:35 eqpt
critical 07/28 15:23:33 eqpt
This is the text description for the condition
alarm tablelist
to find alarm condition codes.
Chapter 40 Alarm Commands
source
to