Adsl Downstream Carrier0 Command; Figure 195 Adsl Upstream Carrier Command Example; Figure 196 Adsl Upstream Carrier Command Display Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide
The most significant bit defines the first tone sequentially. For example, in <m0>,
0x00000001 means tone 31. For example, you could use 0xffff0000 for <m0> to disable
upstream carrier tones 0~15 and leave tones 16 ~ 31 enabled.
The following example disables upstream carrier tones 0~15 for ADSL port 5.

Figure 195 ADSL Upstream Carrier Command Example

ras> adsl uscarrier 5 ffff0000 00000000
The following example displays the results.

Figure 196 ADSL Upstream Carrier Command Display Example

ras> adsl uscarrier 5
port
---- |--------|--------|
5 FFFF0000 00000000
Tone:
m0:0-31, m1:32-63

49.1.14 ADSL Downstream Carrier0 Command

Syntax:
ras> adsl dscarrier0 <port number> [<m1> <m2> <m3> <m4> <m5> <m6> <m7>]
where
<m1> - <m7>
<m1>
<m2>
<m3>
<m4>
<m5>
<m6>
<m7>
The hexadecimal digit is converted to binary and a '1' masks (disables) the corresponding tone.
Disabling a carrier tone turns it off so the system does not send data on it.
312
us carrier
m0 m1
The downstream carrier tones to be masked (disabled). Each
=
can use up to 8 hexadecimal digits (0~ffffffff). Each
<mx>
represents 32 carrier tones (each hexadecimal digit represents 4
tones).
tones 32~63
=
tones 64~95
=
tones 96~127
=
tones 128~159
=
tones 160~191
=
tones 192~223
=
tones 224~255
=
Chapter 49 ADSL Commands
<mx>