This chapter describes how to use the DHCP Relay commands.
41.1 DHCP Relay Commands
Use these commands to configure the DHCP relay feature. See
background information on DHCP relay.
41.1.1 Show Command
Syntax:
ras> switch dhcprelay show
This command displays whether or not the DHCP relay feature is activated, which relay mode
the IES-1248-51 is using, the current list of DHCP servers by VLAN, the status of the DHCP
relay agent info option 82 feature and the information configured for it.
Figure 131 Show Command Example
DHCP relay status: disable
DHCP relay mode:
Server list:
index
vid
----- ----- ------------------ ------------------
1
2
option82 sub-opt1 info (Circuit ID)
----------------- ------------------------------
-
option82 sub-opt2 info (Remote ID)
----------------- ------------------------------
-
41.1.2 Enable Command
Syntax:
ras> switch dhcprelay enable
Chapter 41 DHCP Relay Commands
DHCP Relay Commands
auto
primary-server
1 (*)212.212.212.212 213.213.213.213
2 (*)214.214.214.214 215.215.215.251
C
H A P T E R
secondary-server
IES-1248-51 User's Guide
4 1
Chapter 27 on page 177
for
257