ZyXEL Communications IES-1248-51 User Manual page 160

IES-1248-51 User's Guide
Table 34 Static Multicast (continued)
LABEL
Previous
Next
Reload
Index
MAC Address
1~48
Join All
Leave All
Delete
Adding new entry
Add
160
DESCRIPTION
Click one of these buttons to show the previous/next screen if all status
information cannot be seen in one screen.
Click this button to refresh the screen.
The first table displays the names of the fields. The subsequent tables show the
settings of the IGMP groups.
This is the static multicast group index number.
This is the multicast MAC address.
These fields display the static multicast group membership status of the ADSL
ports.
"V" displays for members and "-" displays for non-members.
Click an ADSL port's status to change it (clicking a "V" changes it to "-" and vise
versa).
Click Join All to make all of the ADSL ports members of the static multicast
group.
Click Leave All to remove all of the ADSL ports from the static multicast group.
Click Delete to remove a static multicast group.
Type a multicast MAC address in the field, and click the Add button to create a
new static multicast entry. Multicast MAC addresses must be
01:00:5E:xx:xx:xx
, where
01:00:5E:10:10:10
Clicking Add saves your changes to the IES-1248-51's volatile memory. The
IES-1248-51 loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
x
is a "don't care" value. For example,
is a valid multicast MAC address.
Chapter 21 Static Multicast