Editable Configuration File; Editable Configuration File Backup; Figure 171 Example: Use An Ftp Client To Connect To The Ies-1248-51; Table 75 Filename Conventions - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide
This is a sample from a FTP session to transfer the IES-1248-51's current configuration file
(including the configuration files of all the IES-1248-51) to the computer file
If your FTP client does not allow you to have a destination filename different than the source,
you will need to rename them as the IES-1248-51 only recognizes "config-0" and "ras". Be
sure you keep unaltered copies of the files for later use.
The following table is a summary. Please note that the internal filename refers to the filename
on the IES-1248-51 and the external filename refers to the filename not on the IES-1248-51,
that is, on your computer, local network or FTP site and so the name (but not the extension)
may vary. After uploading new firmware, use the
confirm that you have uploaded the correct firmware version.

Table 75 Filename Conventions

FILE TYPE
Configuration File
Firmware

47.3 Editable Configuration File

The configuration file can be downloaded as a plain-text (ASCII) file. Edits to the
configuration can be made to this file before it is uploaded again to the IES-1248-51.
Note: You can change the ".dat" file to a ".txt" file and still upload it back to the IES-
1248-51.
Note: Do not upload any invalid files to the IES-1248-51's configuration file, as it may
permanently damage your IES-1248-51.

47.3.1 Editable Configuration File Backup

Configure your system, and then use FTP to backup the plain-text configuration file onto your
computer. Do the following to backup the configuration file:
Use an FTP client to connect to the IES-1248-51.

Figure 171 Example: Use an FTP Client to Connect to the IES-1248-51

C:\> ftp <IES-1248-51 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
294
INTERNAL EXTERNAL
NAME NAME
config-0 *.dat
ras *.bin
Chapter 47 Firmware and Configuration File Maintenance
command on the IES-1248-51 to
sys version
DESCRIPTION
This is the configuration filename for the
IES-1248-51.
This is the Operating System firmware on
the IES-1248-51.
.
config.txt