IES-1248-51 User's Guide
43.2.2 MAC Filter Enable Command
Syntax:
ras> switch mac filter enable [portlist]
where
<portlist>
This command turns on the MAC filtering feature on the specified ADSL port(s) or on all
ADSL ports if no port is specified.
The following example turns on the MAC filtering feature on ADSL port 5.
Figure 144 MAC Filter Enable Command Example
ras> switch mac filter enable 5
43.2.3 MAC Filter Disable Command
Syntax:
ras> switch mac filter disable [portlist]
where
<portlist>
This command turns off the MAC filtering feature on the specified ADSL port(s) or on all
ADSL ports if no port is specified.
The following example turns off the MAC filtering feature on ADSL port 5.
Figure 145 MAC Filter Disable Command Example
ras> switch mac filter disable 5
43.2.4 MAC Filter Mode Command
Syntax:
ras> switch mac filter mode <port> <accept|deny>
272
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
You can specify a single ADSL port <1>, all ADSL ports <*>
=
or a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Chapter 43 MAC Commands