Chapter 48 Snmp; Snmp Commands; Get Community Command; Set Community Command - ZyXEL Communications IES-1248-51 User Manual

This chapter covers Simple Network Management Protocol (SNMP) with the IES-1248-51.

48.1 SNMP Commands

Use these commands to configure SNMP settings. See
information about SNMP.

48.1.1 Get Community Command

Syntax:
ras> sys snmp getcommunity <community>
where
<community>
Enter this command with the community to set the password.

48.1.2 Set Community Command

Syntax:
ras> sys snmp setcommunity <community>
where
<community>
Enter this command with the community to set the password.

48.1.3 Trusted Host Set Command

Syntax:
ras> sys snmp trusthost <ip>

Chapter 48 SNMP

C
H A P T E R
The password for the incoming
=
from the management station.
The password for the incoming
=
management station.
IES-1248-51 User's Guide
SNMP
Chapter 31 on page 193
- and
Get GetNext
- requests from the
Set
4 8
for more
- requests
299