Statistics Screen - ZyXEL Communications PMG1005-T20B User Manual

Each field is described in the following table.
Table 5 Status > Device Info
LABEL
Device Information
Firmware Version
Hardware version
MAC Address
Model Name
Model Name
LAN
IPv4
IP Address
Subnet Mask
GPON
Link State
Transceiver
Rx Power
Tx Power
Tx Bias Current
Supply Voltage
Temperature

3.3 Statistics Screen

Use this screen to look at the current number of the GPON Device packets received through the
Ethernet or the PON interface. Click Status > Statistics to open the following screen.
Chapter 3 Status
DESCRIPTION
This field displays the current version of the firmware the GPON Device uses.
This field displays the current version of the hardware of the GPON Device.
This is the MAC (Media Access Control) address unique to your GPON Device. The MAC
address uses six pairs of hexadecimal notation and follows an industry standard that
ensures no other adapter has the same address.
This field displays the model name of the GPON Device.
This field displays the current IP address of the GPON Device in the LAN. Click this to go to
the screen where you can change it.
This field displays the GPON Device's LAN subnet mask.
This field displays Up when the interface has a connection with OLT (fiber terminal) and
Down when it does not.
This field displays the transceiver's optical receiving power in dBm. The normal range is -6 to
-28 dBm.
This field displays the transceiver's optical transmitting power in dBm. The normal range is .5
to 5 dBm.
This field displays the transceiver's bias current in mA. The normal range is 4-50 mA.
This field displays the transceiver's voltage in Volts. The normal range is 3.13-3.47 Volts.
This field displays the transceiver's temperature in Celsius. The normal range is 0-70 degrees.
PMG1005-T20B User's Guide
16