Vlan Delete Command; Vlan Enable; Vlan Disable; Figure 140 Deleting Default Vlan Example - ZyXEL Communications IES-1248-51 User Manual

2 Use the

Figure 140 Deleting Default VLAN Example

ras> switch vlan cpu set 3

42.4.9 VLAN Delete Command

Syntax:
ras> switch vlan delete <vlanlist>
where
<vlanlist>
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.

Figure 141 VLAN Delete Command Example

ras> switch vlan delete 2

42.5 VLAN Enable

Syntax:
ras> switch vlan <vid>
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.

42.6 VLAN Disable

Syntax:
ras> switch vlan disable <vid>
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
Chapter 42 IEEE 802.1Q Tagged VLAN Commands
switch vlan1q vlan cpu
You can specify a single VID: <1>, all VIDs: <*>, a list of
=
VIDs: <1,3>, you can also include a range of VIDs: <1,5,6~10>.
command to set VID 3 as the management VLAN.
IES-1248-51 User's Guide
269