The following example sets ADSL port 9 to reject ARP, PPPoE and IGMP packets.
Figure 162 Packet Filter Set Command Example
ras> switch pktfilter set 9 arp pppoe igmp
45.1.3 Packet Filter PPPoE Only Command
Syntax:
ras> switch pktfilter pppoeonly <portlist>
This command sets the IES-1248-51 to allow only PPPoE traffic on the specified ADSL
port(s). The system will drop any non-PPPoE packets.
The following example sets ADSL port 1 to accept only PPPoE packets.
Figure 163 Packet Filter PPPoE Only Command Example
ras> switch pktfilter pppoeonly 1
Chapter 45 Packet Filter Commands
IES-1248-51 User's Guide
285