Isolation Commands; Isolation Show Command; Isolation Enable Command; Figure 120 Info Show Example - ZyXEL Communications IES-1248-51 User Manual

An example is shown next.

Figure 120 Info Show Example

ras> sys info show
Hostname:
Location:
7324 RU version: V3.50(TE.1)b5 | 07/30/2005
F/W size: 2326772
MAC address: 00:13:49:00:00:01
System up time:
Bootbase version: V1.09(CHT) | 01/18/2005
F/W build date: Jul 30 2005 01:37:20
DSP code version: f2.30.0000
Hardware version:
Serial number:

39.4 Isolation Commands

Turn on port isolation to block communications between subscriber ports. When you enable
port isolation, you do not need to configure the VLAN to isolate subscribers.

39.4.1 Isolation Show Command

Syntax:
ras> switch isolation show
This command displays the current setting of the subscriber isolation feature.
An example is shown next.

Figure 121 Isolation Show Example

ras> switch isolation show
system isolation: enabled

39.4.2 Isolation Enable Command

Syntax:
ras> switch isolation enable
This command turns on the subscriber isolation feature.
Chapter 39 Command Examples
Contact:
Model: IES-1248-51
0(days) : 0:08:27
IES-1248-51 User's Guide
245