Ieee 802.1Q Tagged Vlan Commands; Introduction To Vlans; Ieee 802.1Q Tagging Types; Filtering Databases - ZyXEL Communications IES-1248-51 User Manual

IEEE 802.1Q Tagged VLAN
This chapter describes the IEEE 802.1Q Tagged VLAN commands.

42.1 Introduction to VLANs

See Chapter 19 on page 147

42.2 IEEE 802.1Q Tagging Types

There are two kinds of tagging:
• Explicit Tagging
A VLAN identifier is added to the frame header that identifies the source VLAN.
• Implicit Tagging
The MAC (Media Access Control) number, the port or other information is used to identify the
source of a VLAN frame.
The IEEE 802.1Q Tagged VLAN uses both explicit and implicit tagging.
It is important for the IES-1248-51 to determine what devices are VLAN-aware and VLAN-
unaware so that it can decide whether to forward a tagged frame (to a VLAN-aware device) or
first strip the tag from a frame and then forward it (to a VLAN-unaware device).

42.3 Filtering Databases

A filtering database stores and organizes VLAN registration information useful for switching
frames to and from the IES-1248-51. A filtering database consists of static entries (Static
VLAN or SVLAN table).

42.3.1 Static Entries (SVLAN Table)

Static entry registration information is added, modified and removed by administrators only.
Chapter 42 IEEE 802.1Q Tagged VLAN Commands
C
H A P T E R
for more background information on VLANs.
IES-1248-51 User's Guide
Commands
4 2
263