Virtual Channel Management; Virtual Channel Management Overview; Virtual Channel Profile Commands; Show Virtual Channel Profile Command - ZyXEL Communications IES-1248-51 User Manual

Virtual Channel Management

This chapter shows you how to use commands to configure virtual channels.

50.1 Virtual Channel Management Overview

See Chapter 16 on page 109

50.2 Virtual Channel Profile Commands

Use the following commands to configure virtual channel profiles.

50.2.1 Show Virtual Channel Profile Command

Syntax:
ras> adsl vcprofile show [vcprofile]
where
[vcprofile]
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).

50.2.2 Set Virtual Channel Profile Command

Syntax:
ras> adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
ras> adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr>
<cdvt> <scr> <bt>
where
<vcprofile>
<vc|llc>
Chapter 50 Virtual Channel Management
C
H A P T E R
for background information on virtual channels and ATM QoS.
The name of the virtual channel profile (up to 31 ASCII characters).
=
The name of the virtual channel profile (up to 31 ASCII
=
characters). You cannot change the DEFVAL or DEFVAL_VC
profiles.
The type of encapsulation (vc or llc).
=
IES-1248-51 User's Guide
5 0
339