Ieee Vlan1Q Tagged Vlan Configuration Commands; Vlan Port Show Command; Vlan Pvid Command; Figure 132 Vlan Port Show Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51 User's Guide

42.4 IEEE VLAN1Q Tagged VLAN Configuration Commands

These switch commands allow you to configure and monitor the IEEE 802.1Q Tagged VLAN.

42.4.1 VLAN Port Show Command

Syntax:
ras> switch vlan portshow [portlist]
where
[portlist]
This command displays the port's IEEE 802.1Q VLAN tag settings.
The following example shows the settings for ADSL port 1.

Figure 132 VLAN Port Show Command Example

ras> switch vlan portshow 3
port pvid priority frametype
----- ---- -------- ---------
3

42.4.2 VLAN PVID Command

Syntax:
ras> switch vlan pvid <portlist> <pvid>
where
<portlist>
<pvid>
This command sets a default VLAN ID for all untagged packets that come in through the
specified port.
264
You can specify a single port <1>, all ports <*> or a list of ports
=
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
1 0 all
You can specify a single port <1>, all ports <*> or a list of ports
=
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
The VLAN ID. Valid parameter range = [1 – 4094].
=
Chapter 42 IEEE 802.1Q Tagged VLAN Commands