Power Save Time; Pwr Save In Err; Auto Error Skip - Canon LBP3360 User Manual

You can specify whether the printer should enter Power Save Mode when an error
•
is occurring in the printer (when the
the message blinks). (See PWR SAVE IN ERR: the next item)

PWR SAVE IN ERR

ON*, OFF
Specifies whether the printer should enter Power Save Mode when an error is
occurring in the printer (when the
the message blinks).
If this item is set to ON, the printer enters Power Save Mode even when an error is
occurring in the printer.
If this item is set to OFF, the printer does not enter Power Save Mode when an
error is occurring in the printer.

POWER SAVE TIME

15 minutes*, 30 minutes, 60 minutes, 180 minutes, 5 minutes
Specifies the time interval until the printer enters Power Save Mode 1 (the Panel
Off mode).
NOTE
If the printer is in any of the following status, the printer does not enter Power Save
Mode (the Panel Off mode) even when the specified time has elapsed.
- An error is occurring in the printer (when the
number in the message blinks), and PWR SAVE IN ERR is set to OFF.
- During the printer's startup

AUTO ERROR SKIP

OFF*, ON
Specifies whether the printer should automatically use the function that, when an
error has occurred, releases the printer from the error temporarily (Error Skip) and
continues the job.
If OFF is specified, you need to skip the error by pressing the
If ON is specified, the printer skips the error automatically without you pressing
the (Online) key.
NOTE
The Error Skip function is only for skipping an error temporarily. Therefore, the data
•
may not be printed properly.
(Message) indicator is on, or the number in
(Message) indicator is on, or the number in
(Message) indicator is on, or the
SETUP Menu Settings
6
(Online) key.
6-11