Removing engine coolant
17 12 186
return pipe
–
Remove front fairing panel.
–
Remove left running board.
–
Remove top and left tunnel panels.
–
Remove left side trim panel.
–
Remove knee pad.
....................................................See Group 46
a
–
Drain coolant from return lines.
1
•
Remove fastener (arrows) from front frame.
•
Open hose clamps (1) with pliers,
BMW No. 17 5 500.
•
Remove fasteners (arrows) from frame.
•
Open hose clamps (1) with pliers,
BMW No. 17 5 500.
•
Disconnect coolant hoses from coolant pipe.
•
Pull coolant pipe forward to remove.
17 5 500
C1170110
17 5 500
1
C1170090
Installing coolant pipes
e
Caution:
Always make sure that hose clamps are correctly
positioned, in order to ensure easy access when-
ever necessary.
Make sure the hoses do not chaff.
•
Installation is the reverse of the removal proce-
dure.
•
Fill system with coolant.
•
After running the engine check the coolant level
and top up if necessary.
17.11