Replacing freewheel gear
•
Measure bearing bore.
•
Check teeth for distortion, wear and chipping.
•
Check friction face for wear.
Wear values:
Inside diameter................max. 22.05 mm (0.868 in)
L
Note:
Before installing freewheel, check Woodruff key.
•
Make sure that the Woodruff key is installed with
the flat face parallel to the crankshaft axis, as
otherwise it is not possible to install the free-
wheel.
•
Oil bushing and crankshaft stub before installing.
Replacing oil pump
11 11 300 Removing and installing oil pump
–
Remove magnetic wheel.
C1110270
•
Turn crankshaft until securing screws (arrows)
are visible.
•
Remove screws and remove pump.
C1110280
11.29