Replacing Inlet Strainer - BMW C1 Repair Manual

Removing and installing filler
31 67 002
funnel
– Remove front fairing panel.
....................................................See Group 46
a
– Swing the headlight forward and down.
•
Pry filler funnel (1) out of holder (2).
•
Disconnect filler hose (3) from filler funnel.
When installing:
•
Installation is the reverse of the removal proce-
dure.

Replacing inlet strainer

61 68 003
– Remove front fairing panel.
....................................................See Group 46
a
– Swing the headlight forward and down.
•
Open cap of filler funnel.
•
Remove inlet strainer.
When installing:
•
Installation is the reverse of the removal proce-
dure.
1
2
3
C1610170
61.13