Removing and installing
62 11 200
instrument panel
–
Remove handlebar trim.
–
Remove instrument panel.
....................................................See Group 46
a
•
Remove 4 fasteners (arrows) securing instru-
ment cluster.
•
Remove instrument cluster.
When installing:
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Fastener for instrument cluster ....................... 3 Nm
62.6
Replacing wiring harness
•
Remove fastener (arrow) for cable clip.
•
Remove fasteners for cable tab connector.
C1620020
•
Carefully ease out bulb sockets.
•
Remove wiring harness.
When installing:
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torques:
Fastener for cable clip .................................... 1 Nm
Fastener for cable tab connector ................ 0.5 Nm
C1620020