Replacing variator
Removing variator
•
Remove cover.
11 7 651
•
Variator cover removed.
•
Insert pin, BMW No. 11 7 651, to secure crank-
shaft in TDC position.
e
Caution:
Make sure that belt and belt pulleys remain free of
oil and grease.
•
Using holder, BMW No. 11 7 521, remove nut
from clutch drum.
•
Remove clutch drum, using a puller if necessary.
11.34
•
To relieve tension on belt, turn outer plate (arrow)
of driven variator counter-clockwise by hand,
while pressing it against inner plate.
C1000220
•
The purpose is to move belt onto small-diameter
wheel and hold the two plates apart.
11 7 521
•
Remove driven variator with belt from variator
shaft and lift clear of driven variator.
C1110380
C1110390
C1110040