Starter relay
Replacing starter relay
61 31 390
e
Caution:
Disconnect earth (ground) lead from battery and in-
sulate it.
–
Remove right rear side trim panel.
....................................................See Group 46
a
•
Remove fasteners (arrows) for battery cables.
•
Remove protective cap (arrow).
61.10
•
Remove fasteners for control cable.
•
Lift starter relay to the right and remove.
When installing:
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
e
Caution:
C1610100
Make sure all cables and cores are reconnected to
their original terminals.
X
Tightening torques:
Fastener for battery cable............................... 3 Nm
Fastener for control cable ........................... 0.4 Nm
C1610040
C1610110