Checking Safety Elements; (Inspections I, Ii, Iii And Iv); Checking Bowden Cable Of Central Seat-Belt Release; Checking Belt Straps And Belt Buckles - BMW C1 Repair Manual

Checking safety elements

(Inspections I, II, III and IV)

Checking Bowden cable of central
seat-belt release
72 5 501
•
Use test gauge, BMW No. 72 5 501, to preten-
sion release lever
•
Engage seat belts in their buckles with an audi-
ble click
•
Move the handlebars all the way from left to right
and check that belt buckles do not disengage
•
If necessary, check Bowden cable of central
seat-belt release
00.64

Checking belt straps and belt buckles

•
Fully unreel seat belts and check for damage

Checking inertia reels

•
Once unreeled, belt must reel in automatically
when released

Checking inertia-reel locking action

•
Engage seat belts in their buckles with an audi-
ble click
•
Pull firmly on belt strap and make sure that inertia
reel locks
C1720050