Disassembling And Assembling Gearbox, Checking Individual Components; Removing Gearbox Cover - BMW C1 Repair Manual

Disassembling and
23 00 043
assembling gearbox, checking
individual components
Jobs marked # can also be performed with the drive
swinging arm installed.
Clean the individual components and check the
following parts for wear:
•
Bearings and seats of shaft sealing rings
•
All gears for wear at tooth edges
•
Tooth profile of variator and output shafts
•
Gears for damage

# Removing gearbox cover

11 11 018
– Remove complete variator assembly.
– Drain gearbox oil
•
Open drain plug (arrow).
C1110680
C110690
11.47