Replacing 2-Point Seat Belt - BMW C1 Repair Manual

Replacing 2-point seat belt

72 11 002
– Open the seat.
– Remove the backrest.
– Remove head restraint.
– Remove the rear stowage compartment.
– Remove the rear panel.
– Remove right C-pillar trim panel.
– Remove inside trim from right C-pillar.
....................................................See Group 46
a
•
Using a blunt tool, pull the belt guide (arrow) in in-
terior trim of C pillar to one side.
•
Disengage seat belt from guide (arrow) at shoul-
der bar.
•
Remove fasteners (arrows) of secondary mud-
guard.
•
Remove secondary mudguard.
C1720100
•
Remove fastener (arrow) of inertia reel.
•
Pull inertia reel down and to the rear to remove.
C1460400
C1720070
C1720080
72.7