Removing and installing roof
46 63 040
–
Remove the backrest.
–
Remove head restraint.
–
Remove spoiler.
–
Remove inside trim of C-pillars.
–
Remove lightweight foam elements from left and
right C-pillars.
–
Remove lightweight foam element from cross-
bar.
•
Remove fasteners (arrows) from top of wind-
screen.
e
Caution:
Do not scratch the roof frame – mask it off if neces-
sary.
•
Starting at the rear and working forward to the
windscreen, pry left and right A-pillar trim out of
the retaining clips.
•
Pull the roof to the rear until it is clear of the A-
pillar trim.
When installing:
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
e
Caution:
Make sure that the seal between front windscreen
and roof is correctly positioned.
X
Tightening torques:
Fasteners for windscreen ............................... 5 Nm
46.26
Removing and installing
51 31 001
windscreen
–
Remove front fairing panel.
–
Remove left and right mirrors.
–
Disengage side trim panels from front frame at
left and right.
–
Remove wiper arms.
–
Remove instrument panel.
–
Remove roof.
C1460330
•
Remove fasteners (arrows) from bottom of wind-
screen.
e
Caution:
Do not scratch the roof frame – mask it off if neces-
sary.
•
Starting at the top and working down, pry A-pillar
trim out of the retaining clips.
•
Lift front windscreen up to remove.
•
Disengage tube for windscreen-washing fluid.
C1460340