Removing And Installing Coolant Hoses - BMW K 1100 LT/RS Repair Manual

3
1
Removing and installing coolant
hoses
•
Remove fuel tank.
•
[RS] Remove bottom section of fairing
•
Remove left/right side fairings.
•
Remove corresponding coolant hose.
•
Remove radiator in order to release connections
on coolant filler neck (1).
L
Note:
Before screwing back in, clean the thread of micro-
encapsulated screw (2) and secure it with
Loctite 243.
X
Tightening torques:
Coolant filler neck to cylinder head (2)
Temperature sensor to coolant filler neck (3)
2
.
........... 9 Nm
30 Nm
LT170080
17.9