Headlight
–
Remove front fairing panel.
–
Swing the headlight forward and down.
....................................................See Group 46
a
L
Note:
Do not touch inside of reflector and glass of bulbs
with bare hands.
Removing and installing
63 12 090
headlight
1
•
Open cable tie (arrow).
•
Disconnect plug (1) for headlight.
•
Pull bulb holder (2) for parking light out of head-
light housing.
•
Push headlight back.
•
Remove fasteners (arrows).
•
Remove headlight.
When installing:
•
Installation is the reverse of the removal proce-
dure: pay particular attention to the following.
e
Caution:
When installing, make sure that the wiring harness is
correctly routed and secured.
–
Secure wiring harness with cable ties.
....................................................See Group 61
a
•
Adjust headlight.
Setting:
... -10 cm (- 4.7 in) over a distance of 10 m (32.8 ft)
Replacing intermediate frame
–
Remove headlight.
2
C1170200
•
Remove fasteners (arrows) securing intermedi-
ate frame.
•
Remove intermediate frame.
When installing:
Installation is the reverse of the removal procedure.
X
Tightening torques:
Fasteners for intermediate frame .................... 9 Nm
C1630070
C1170200
63.5