Changing The Called Ae-Title - AGFA Drystar 4500 Reference Manual

Changing Network-Dicom configuration

Changing the called AE-title

Perform steps 1 to 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key three times, followed by the
2
Confirm key to select 'Network-Dicom'.
The 'Network-Dicom' screen is displayed:
7 Remove modality
8 Add modality
Press the Confirm key to select 'Called AE-title'.
3
The 'Called AE-title' screen is displayed:
If the printer AE-title has already been assigned, it will be shown on the display.
Change the printer AE-title by means of the arrow keys. Refer to
4
page 25. Make sure not to enter more than 16 characters.
Entries are case sensitive.
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
2800E EN 20050215
'Accessing the Change settings menu'
D 4500 R
RYSTAR
procedure on
e.g. DS4500
'Data entry'
Advanced operation (key-operator mode)
EFERENCE MANUAL
on
71