Restoring The Network Settings - AGFA Drystar 5301 XL Reference Manual

Drystar 5301 XL, Drystar 5302 XL | Advanced Operation (key-operator mode) | 59

Restoring the network settings

When necessary, you can restore the network settings of the printer. You can
only restore a back-up copy of the network settings from an external USB flash
drive.
1. On the Restore configuration menu, press the Down key, followed by the
Confirm key to select 'Network only'.
The following 'Restore network' screen appears:
2. Insert the USB flash drive, which contains a back-up of the network
settings.
• If no data are available on the USB flash drive, the following message
is displayed:
• If multiple data are present on the USB flash drive, the following
screens appear successively:
Afterwards, the 'Restore network' screen is displayed:
1 From 05/04/05
2 From 28/03/05
1 From 05/04/05
etc...
2 From 28/03/05
etc...
3. Press the up/down arrow keys to select the desired save set file, followed
by the Confirm key.
The following confirmation screen is displayed:
4. Press the Confirm key (YES) to proceed with the selected file, or the
Escape key (NO) to quit the procedure without any changes.
If you press the Confirm key, the printer will restore the network settings
from the external USB flash drive on the internal media and the following
screens appear successively:
Note: Make sure that you insert the correct USB flash drive,
containing the printer settings you want to restore.
3730D EN 20210520 0952