Explanation Of Each Setting Menu And Items (Aculaser C2000); Printing Menu (Aculaser C2000); Tray Menu (Aculaser C2000) - Epson ACULASER COLOR 2000 Service Manual

EPSON AcuLaser C2000 / AcuLaser C1000
Table 1-30.
User Setting Items Excluded from the Setup Menu
Setting Item Setting Value
32-byte character
PrinterName
string
32-byte character
MFG in the Device ID
string
32-byte character
MDL in the Device ID
string
32-byte character
DES in the Device ID
string
32-byte character
CID in the Device ID
string
1.4.5 Explanation of Each Setting Menu and Items
(AcuLaser C2000)
The following explains concerning items which are unique specifications in the
AcuLaser Color 2000.

1.4.5.1 Printing Menu (AcuLaser C2000)

Paper Source
This selects the paper feeder in the case that the Paper Type = Normal.
Auto Paper is fed from the paper feeder where the
specified type and size of paper are kept.
MP Paper is fed from the MP tray.
LC1 Paper is fed from the first level cassette.
LC2 Paper is fed from the second level cassette.
NOTE: When the paper size setting is "Envelope" (IB5, C10, C5, DI, MON,
C6), the paper feeder used is always the MP tray.
NOTE: When the Paper Type = Thick or Trnsprnc, the paper feeder used
is always the MP tray
Product Descriptions
Default Value Setting Method
EJL, PrinterName
(TBD)
command
(Undefined) EJL
(Undefined) EJL
(Undefined) EJL
(Undefined) EJL
Control Panel (AcuLaser C2000)
Quantity
This sets the number of copies when copies are being printed in set units. The
specification in this setting has priority over the Copies setting. Therefore, if the
Quantity is 2 or greater, the setting value specified by Copies becomes invalid.
Collate printing is performed using RAM or HDD. When optional HDD is not
installed, Quantity setting can be used if RAM capacity is over 64MB.
This setting is specified only by PJL, EJL, ESC/Page or ESC/Page-Color
command and the setting value can not be stored in memory.
If the data for one print job could not be stored in the printer memory, the
warning Collate was disabled is displayed and one set only is printed out.

1.4.5.2 Tray Menu (AcuLaser C2000)

MP Type, LC1 Type, LC2 Type
This specifies the type of paper set in the MP tray, LC1/2 Cassette.
Setting Value Setting Contents
Plain Paper (copy paper
Plain
etc.)
Letterhead Letterhead
Recycled Recycled paper
Color Color paper
Trnsprncy OHP transparency
Labels Label paper
<When the setting of Paper Type is envelopes (IB5, C10, C5, DL, MON, C6)>
The paper feeder used is always the MP tray. Engine control is performed
as envelops.
<When Page Size=A5, B5, HLT, GLT, GLG, EXE, F4, CTM>
The paper feeder used is always the MP tray. Paper Type setting is
prioritized in selecting engine control mode. MP Type setting is used when
Paper Type=Normal.
Revision E
Engine Control Available Tray
Plain paper MP, LC1&2
Plain paper MP
Plain paper MP, LC1&2
Plain paper MP, LC1&2
OHP (half speed) MP
Label paper (half
MP
speed)
48