Applying Thermal Paste; Installing The Processor Heat Sink; Concluding Steps - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Processors

11.5.4.2 Applying thermal paste

Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
I
If the processor upgrade or replacement kit contains a new CPU heat
sink, a thin layer of thermal compound has already been pre-applied
to its lower surface. In this case, please proceed with section
"Installing the heat sink" on page

11.5.4.3 Installing the processor heat sink

Ê Install the processor heat sink as described in sections
sink and processor" on page 246

11.5.5 Concluding steps

"Reassembling" on page 59
Ê
"Connecting the server to the power source" on page 64
Ê
"Switching on the server" on page 66
Ê
250
251.
and
Upgrade and Maintenance Manual
247.
"Installing the heat sink" on page
"Preparing the heat
247.
RX2520 M1