Table of Contents
Advertisement
Processors
"Reassembling" on page 59
Ê
"Connecting the server to the power source" on page 64
Ê
Ê If applicable,
"Updating or recovering the system board BIOS and iRMC" on
page 75
"Switching on the server" on page 66
Ê
I
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the error
message CPU has been changed. This only indicates that the CPU
configuration has been altered. There is no technical problem.
In order to turn off the Global Error indicator, please proceed as
follows:
Ê Restart the system and wait for screen output to appear.
Ê Press the [F2] function key to enter the BIOS.
If assigned, enter the BIOS password and press [Enter].
Ê In the Save & Exit menu, select Save Changes and Exit or Save
Changes and Reset.
Ê Ensure that the Global Error indicator has stopped flashing.
"Enabling SVOM boot watchdog functionality" on page 87
Ê
"Enabling BitLocker functionality" on page 93
Ê
244
Upgrade and Maintenance Manual
RX2520 M1
Advertisement
Table of Contents
