Concluding Steps; Replacing The 12X 3.5 Inch Hdd Backplane; Preliminary Steps - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

7.4.2.4

Concluding steps

"Installing the fan box" on page 171
Ê
"Reassembling" on page 59
Ê
"Installing 2.5-inch HDD / SSD modules" on page 127
Ê
"Connecting the server to the power source" on page 64
Ê
"Switching on the server" on page 66
Ê
"Enabling BitLocker functionality" on page 93
Ê
7.4.3

Replacing the 12x 3.5 inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.4.3.1

Preliminary steps

"Locating the defective server" on page 49
Ê
"Disabling or suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 51
Ê
"Disconnecting power cords" on page 52
Ê
Ê Remove all HDD modules from the server as described in section
"Removing 3.5-inch HDD modules" on page
V
CAUTION!
Ensure that all hard disk drives are uniquely identified so that you can
reinsert them into their original bays after replacing the HDD
backplane.
"Getting access to the component" on page 53
Ê
"Removing the fan box" on page 168
Ê
RX2520 M1
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Hardware: 10 minutes
138.
151