System board and components
Tools: – Phillips PH0 / (+) No. 0 screw driver
– combination pliers and flat nose pliers
14.3.3.1 Preliminary steps
"Disabling or suspending BitLocker functionality" on page 67
Ê
"Disabling SVOM boot watchdog functionality" on page 68
Ê
"Locating the defective server" on page 49
Ê
"Shutting down the server" on page 51
Ê
"Disconnecting power cords" on page 52
Ê
"Getting access to the component" on page 53
Ê
14.3.3.2 Removing the UFM
"Removing the UFM" on page 340
Ê
Ê The UFM spacer remains on the system board.
14.3.3.3 Installing the new UFM
Figure 233: Preparing the new UFM
Ê Remove the nylon screw from the new UFM (1).
342
Upgrade and Maintenance Manual
RX2520 M1