Removing The Tpm - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2520 M1:

Table of Contents

14.4.2 Removing the TPM

Field Replaceable Unit

Tools: Removing the system board:

– Phillips PH2 / (+) No. 2 screw driver

Removing the TPM:

– flat nose pliers

– thin slotted screw driver (2 x 0.4 mm)

For the Japanese market:

– Dedicated TPM screw driver (CWZ8291A)

Advise your contact persons that they must provide you with TPM

backup copies. For security reasons, the TPM must be restored/re-

saved by the customer. After installing a new system board, the TPM

must be enabled. You may not clear the TPM data.

If the contact persons DO NOT have a backup copy available, inform

them that replacing the TPM will cause to lose all data.

Upgrade and Maintenance Manual

System board and components

Hardware: 30 minutes