Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual page 380

Conversion configurations
"Removing the fan box" on page 168
Ê
Ê Remove the pass-through board, see section
through/expander board" on page
Ê Install the expander board, see section
through/expander board" on page
Figure 257: HDD dummy lock
Ê Press the left handle of the HDD dummy module with light pressure, to break
out the HDD dummy lock.
Ê Remove both HDD dummy locks.
"Removing the ODD carrier" on page 277
Ê
Ê Install HDD modules, see section
page 137, or HDD dummy modules see
module" on page
Ê For more information about the cabling see
"Installing the fan box" on page 171
Ê
"Reassembling" on page 59
Ê
Ê Connect all external cables.
"Connecting the server to the power source" on page 64
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
"Enabling BitLocker functionality" on page 93
Ê
380
152.
156.
"Installing a 3.5-inch HDD module" on
140.
97.
Upgrade and Maintenance Manual
"Removing a pass-
"Installing the pass-
"Installing a 3.5-inch dummy
"Configuration 9" on page
"Using the Chassis ID
409.
RX2520 M1