Table of Contents
Advertisement
Conversion configurations
"Installing the 12x 2.5-inch HDD SAS backplane" on page 148
Ê
Ê Install the panelhousing, see
page 325
Ê Installing the HDD modules or HDD dummy modules, see
inch HDD / SSD module" on page 129
module" on page
"Installing the front cover 2.5-inch version" on page 377
Ê
Ê For more information about the cabling see
"Installing the fan box" on page 171
Ê
Ê Remove the ID card from the multicage and insert the ID card into the slot
in the panelhousing.
"Reassembling" on page 59
Ê
Ê Connect all external cables.
"Connecting the server to the power source" on page 64
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
"Enabling BitLocker functionality" on page 93
Ê
15.3.2.13 Configuration 7 to configuration 8
Figure 271: 12x 2.5-inch HDD version
390
"Re-installing the front panel cage" on
132.
97.
Upgrade and Maintenance Manual
and
"Installing a 2.5-inch dummy
"Configuration 8" on page
"Using the Chassis ID
"Installing a 2.5-
408.
RX2520 M1
Advertisement
Table of Contents
